Environment
Resolution
Upgrading an existing ZCM 10 Server
You must be running ZCM 10.2 on all your ZCM servers, and have 10.2 marked "baselined" before attempting to apply the 10.2.2 update. It is not necessary to apply update 10.2.1 before applying 10.2.2.
ZCM 10.2.2 is a "cumulative" update, which means it contains all of the updates since 10.2, and supersedes the update for ZCM 10.2.1. Once ZCM 10.2.2 is shown in your list of Available System Updates, then ZCM 10.2.1 will no longer be accessible.
If you have started the deployment of 10.2.1, it is not necessary to complete that deployment (i.e., it does not need to be marked "baselined") before attempting to deploy 10.2.2.
The preferred method to obtain this update is to use online System Updates: see section III in the online document "ZENworks 10 Configuration Management System Administration Reference", entitled "ZENworks System Updates".
If you cannot use online System Updates, and need to import the update manually, you can download a zip file containing the update. See "ZCM 10.2.2 upgrade manual import file" at https://download.novell.com/patch/finder
10.2.2 contains fixes since 10.2, and Novell recommends that updates prior to 10.2 are deleted, since they are no longer required: to do so from the ZENworks Control Center, select "Configuration"> "System Updates" then select the previous updates (such as 10.1, 10.1.1, 10.1.2a and 10.1.3), then select "Action"> "Delete Update". If the earlier updates in the list are not deleted, then any new servers installed after this time, and servers upgrading from earlier versions, may have these updates applied unnecessarily. The deletion can take place before, or after, applying 10.2.2. Please note: after deleting these updates, if you perform a "check for updates", they will return in your list of updates, but because they are not downloaded or assigned to any devices at that point, they will not interfere with future updates.
In order to upgrade the agent on your workstations, they must be running version 10.0.3 or later, it is not necessary to upgrade all agents to 10.1 or higher before applying this update. If you have any agents running 10.1.3 or earlier versions, it is necessary to have "Support Pack 2 for ZCM (10.2)" available in your list of System Updates, as that is required to upgrade the agents to 10.2, before they are upgraded to 10.2.2 as a separate process.
Novell recommends that you upgrade servers first, before workstations. This ensures that in the event of an unsuccessful server upgrade, that workstations with a newer version of the software are not contacting servers with an older version.
Version Information:
Windows: %ZENWORKS_HOME%\version.txt = 10.2.2.46430
Linux: /etc/opt/novell/zenworks/version.txt = 10.2.2.33386
To verify that a server has been updated to 10.2.2, check the following versions and/or msi/rpm on the managed devices:
ZENworks Configuration Management Version (Windows) | 10.2.2.46206 |
ZENworks Configuration Management Version (Linux) | 10.2.2.33386 |
ZENworks Asset Management Version | 10.2.2.44767 |
ZENworks Patch Management Version | 10.2.2.7 |
ZENworks Agent Version | 10.2.2.46430 |
Modules
CASA.msi
CASA.x86_64.msi
CasaAuthTokenServer.msi
novell-proxydhcp-10.2.2.44220.msi
novell-tftp-10.2.2.44220.msi
novell-zenworks-actions-10.2.2.44155.msi
novell-zenworks-actions-langs-client-10.2.2.44932.msi
novell-zenworks-actionhandlers-10.2.2.30021.msi
novell-zenworks-actionhandlers-lang-10.2.2.30021.msi
novell-zenworks-actionutils-10.2.2.24095.msi
novell-zenworks-addon-image-server-10.2.2.44767.msi
novell-zenworks-addon-image-langs-server-10.2.2.44767.msi
novell-zenworks-agent-help-10.2.2.40415.msi
novell-zenworks-asset-management-server-10.2.2.44767.msi
novell-zenworks-asset-management-langs-server-10.2.2.44767.msi
novell-zenworks-assetmanagementmodule-10.2.2.44221.msi
novell-zenworks-assetmanagementmodule-langs-client-10.2.2.44932.msi
novell-zenworks-bundle-10.2.2.42147.msi
novell-zenworks-bundle-langs-client-10.2.2.44932.msi
novell-zenworks-bundles-server-10.2.2.44767.msi
novell-zenworks-bundles-langs-server-10.2.2.44767.msi
novell-zenworks-certificate-authority-server-10.2.2.44767.msi
novell-zenworks-certificate-authority-langs-server-10.2.2.44767.msi
novell-zenworks-configure-server-10.2.2.44932.msi
novell-zenworks-configure-langs-server-10.2.2.45159.msi
novell-zenworks-common-jars-10.2.2.44767.msi
novell-zenworks-sybase-libs-10.0.1.3835.msi
novell-zenworks-content-distribution-point-10.2.2.35837.msi
novell-zenworks-content-distribution-point-langs-client-10.2.2.44932.msi
novell-zenworks-core-server-10.2.2.44767.msi
novell-zenworks-core-langs-server-10.2.2.44767.msi
novell-zenworks-discovery-server-10.2.2.45159.msi
novell-zenworks-discovery-langs-server-10.2.2.45159.msi
novell-zenworks-deployment-server-10.2.2.44767.msi
novell-zenworks-deployment-langs-server-10.2.2.44767.msi
novell-zenworks-extnlibraries-10.2.2.42559.msi
novell-zenworks-extnlibraries-lang-10.2.2.42559.msi
novell-zenworks-grouppolicyhelper-10.2.2.32738.msi
novell-zenworks-image-management-10.2.2.22971.msi
novell-zenworks-imaging-server-10.2.2.35837.msi
novell-zenworks-inventory-10.2.2.44624.msi
novell-zenworks-inventory-langs-client-10.2.2.44932.msi
novell-zenworks-inventory-server-10.2.2.45159.msi
novell-zenworks-inventory-langs-server-10.2.2.45159.msi
novell-zenworks-java-utilities-server-10.2.2.45159.msi
novell-zenworks-java-utilities-langs-server-10.2.2.45159.msi
novell-zenworks-managed-devices-server-10.2.2.44767.msi
novell-zenworks-managed-devices-langs-server-10.2.2.44767.msi
novell-zenworks-patch-10.2.2.25717.msi
novell-zenworks-patch-management-agent-10.2.2.7.msi
novell-zenworks-patch-management-server-10.2.2.7.msi
novell-zenworks-policy-10.2.2.38490.msi
novell-zenworks-policy-langs-client-10.2.2.44932.msi
novell-zenworks-policies-server-10.2.2.44767.msi
novell-zenworks-policies-langs-server-10.2.2.44767.msi
novell-zenworks-policyhandlers-10.2.2.44165.msi
novell-zenworks-policyhandlers-lang-10.2.2.44155.msi
novell-zenworks-policylibraries-10.2.2.44155.msi
novell-zenworks-pre_pkg-10.2.2.44767.msi
novell-zenworks-preboot-langs-server-10.2.2.44767.msi
novell-zenworks-preboot-server-10.2.2.44767.msi
novell-zenworks-primary-agent-10.2.2.45218.msi
novell-zenworks-primary-agent-langs-client-10.2.2.44932.msi
novell-zenworks-pxeclientfiles-10.2.2.44220.msi
novell-zenworks-remotemanagement-10.2.2.44165.msi
novell-zenworks-remotemanagement-langs-client-10.2.2.44932.msi
novell-zenworks-remote-management-server-10.2.2.44767.msi
novell-zenworks-remote-management-langs-server-10.2.2.44767.msi
novell-zenworks-reports-server-10.2.2.45159.msi
novell-zenworks-reports-langs-server-10.2.2.45159.msi
novell-zenworks-rm-md-core-10.2.2.42133.msi
novell-zenworks-rm-md-core-10.2.2.42133.x86_64.msi
novell-zenworks-rm-repeater-10.2.2.37118.msi
novell-zenworks-rm-viewer-10.2.2.42133.msi
novell-zenworks-rm-viewer-10.2.2-43830.noarch.rpm
novell-zenworks-rm-server-10.2.2.42133.msi
novell-zenworks-status-collection-point-10.2.2.35837.msi
novell-zenworks-status-collection-point-langs-client-10.2.2.44932.msi
novell-zenworks-system-update-10.2.2.42833.msi
novell-zenworks-system-update-server-10.2.2.44767.msi
novell-zenworks-system-update-langs-server-10.2.2.44767.msi
novell-zenworks-temp-extras-server-10.2.2.44767.msi
novell-zenworks-temp-extras-langs-server-10.2.2.44767.msi
novell-zenworks-thirdpartyimagingutils-10.2.2.44220.msi
novell-zenworks-umia-10.2.2.44624.msi
novell-zenworks-uninstall-10.2.2.44767.msi
novell-zenworks-usermanagement-10.2.2.44834.msi
novell-zenworks-usermanagement-langs-client-10.2.2.44932.msi
novell-zenworks-usermanagement-10.2.2.44834.x86_64.msi
novell-zenworks-usermanagement-langs-client-10.2.2.44932.x86_64.msi
novell-zenworks-version-primary-server-10.2.2.46206.msi
novell-zenworks-windows-desktop-10.2.2.46407.msi
novell-zenworks-windows-desktop-langs-client-10.2.2.46325.msi
novell-zenworks-windows-desktop-langs-client-10.2.2.46325.x86_64.msi
novell-zenworks-winproxy-10.2.2.35837.msi
novell-zenworks-WinProxy-langs-client-10.2.2.44932.msi
novell-zenworks-xplat-pre-agent-10.2.2.37192.msi
novell-zenworks-zcm-server-10.2.2.44767.msi
novell-zenworks-zcm-langs-server-10.2.2.44767.msi
novell-zenworks-zencore-agent-10.2.2.44932.msi
novell-zenworks-zencore-agent-langs-client-10.2.2.44932.msi
novell-zenworks-zennotifyicon-10.2.2.35837.msi
novell-zenworks-zennotifyicon-langs-client-10.2.2.44932.msi
novell-zenworks-zisdservice-10.2.2.44220.msi
novell-zenworks-ziswin-10.2.2.44220.msi
novell-zenworks-zmediacreator-10.2.2.44220.msi
novell-zenworks-zmgbootcd-10.2.2.44220.msi
novell-zenworks-zmgexplorer-10.2.2.44220.msi
novell-zenworks-zmgmcast-10.2.2.44220.msi
novell-zenworks-zmgpolicy-10.2.2.44220.msi
novell-zenworks-zmgservices-10.2.2.44220.msi
novell-zenworks-zmgupdate-10.2.2.44220.msi
novell-zenworks-znews-server-10.2.2.44767.msi
novell-zenworks-znews-langs-server-10.2.2.44767.msi
novell-zenworks-version-10.2.2.46430.msi
CASA_auth_token_jaas_support-1.7.1605-0.noarch.rpm
CASA_auth_token_svc-1.7.1605-0.noarch.rpm
novell-proxydhcp-10.2.2-44220.i586.rpm
novell-tftp-10.2.2-44220.i586.rpm
novell-zenworks-actions-10.2.2-44155.noarch.rpm
novell-zenworks-addon-image-server-10.2.2-44767.noarch.rpm
novell-zenworks-addon-image-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-asset-management-server-10.2.2-44767.noarch.rpm
novell-zenworks-asset-management-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-bundle-10.2.2-42147.noarch.rpm
novell-zenworks-bundles-server-10.2.2-44767.noarch.rpm
novell-zenworks-bundles-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-certificate-authority-server-10.2.2-44767.noarch.rpm
novell-zenworks-certificate-authority-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-common-jars-10.2.2.44767-44767.noarch.rpm
novell-zenworks-configure-server-10.2.2.44767-44767.noarch.rpm
novell-zenworks-configure-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-sybase-libs-10.0.1-3870.noarch.rpm
novell-zenworks-core-server-10.2.2-44767.noarch.rpm
novell-zenworks-core-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-discovery-server-10.2.2-45159.noarch.rpm
novell-zenworks-discovery-langs-server-10.2.2-45159.noarch.rpm
novell-zenworks-deployment-server-10.2.2-44767.noarch.rpm
novell-zenworks-deployment-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-inventory-server-10.2.2-45159.noarch.rpm
novell-zenworks-inventory-langs-server-10.2.2-45159.noarch.rpm
novell-zenworks-java-utilities-server-10.2.2-45159.noarch.rpm
novell-zenworks-java-utilities-langs-server-10.2.2-45159.noarch.rpm
novell-zenworks-managed-devices-server-10.2.2-44767.noarch.rpm
novell-zenworks-managed-devices-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-patch-management-10.2.2-7.noarch.rpm
novell-zenworks-policies-server-10.2.2-44767.noarch.rpm
novell-zenworks-policies-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-policy-10.2.2-38490.noarch.rpm
novell-zenworks-preboot-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-preboot-server-10.2.2-44767.noarch.rpm
novell-zenworks-pre_pkg-10.2.2-44767.noarch.rpm
novell-zenworks-primary-agent-10.2.2-45218.noarch.rpm
novell-zenworks-remote-management-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-remote-management-server-10.2.2-44767.noarch.rpm
novell-zenworks-reports-server-10.2.2-45159.noarch.rpm
novell-zenworks-reports-langs-server-10.2.2-45159.noarch.rpm
novell-zenworks-system-update-10.2.2-42833.noarch.rpm
novell-zenworks-system-update-server-10.2.2-44767.noarch.rpm
novell-zenworks-system-update-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-temp-extras-server-10.2.2-44767.noarch.rpm
novell-zenworks-temp-extras-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-thirdpartyimagingutils-10.2.2-44220.i586.rpm
novell-zenworks-uninstall-10.2.2-44767.noarch.rpm
novell-zenworks-version-primary-server-10.2.2-46206.noarch.rpm
novell-zenworks-xplat-content-distribution-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-content-distribution-langs-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-equinox-runtime-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-imaging-server-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-pre-agent-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-primary-agent-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-satellite-server-langs-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-ss-configuration-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-ss-uninstall-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-status-collection-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-status-collection-langs-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-system-update-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-zencore-agent-10.2.2-37192.noarch.rpm
novell-zenworks-xplat-zmd-runtime-deps-10.2.2-37192.noarch.rpm
novell-zenworks-zcm-server-10.2.2-44767.noarch.rpm
novell-zenworks-zcm-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-zencore-agent-10.2.2-44932.noarch.rpm
novell-zenworks-zmediacreator-10.2.2-44220.i586.rpm
novell-zenworks-zmgbootcd-10.2.2-44220.i586.rpm
novell-zenworks-zmgexplorer-10.2.2-44220.i586.rpm
novell-zenworks-zmglibs-10.2.2-44220.i586.rpm
novell-zenworks-zmgmcast-10.2.2-44220.i586.rpm
novell-zenworks-zmgservices-10.2.2-44220.i586.rpm
novell-zenworks-zmgpolicy-10.2.2-44220.i586.rpm
novell-zenworks-zmgpxeclientfiles-10.2.2-44220.i586.rpm
novell-zenworks-zmgupdate-10.2.2-44220.i586.rpm
novell-zenworks-zmgweb-10.2.2-44220.i586.rpm
novell-zenworks-znews-server-10.2.2-44767.noarch.rpm
novell-zenworks-znews-langs-server-10.2.2-44767.noarch.rpm
novell-zenworks-version-10.2.2-46430.noarch.rpm
To verify that a managed device has been upgraded successfully to 10.2.2, check the module versions shown below against those in the Agent Status section of the Z-Icon Properties>Status page:
Asset Management | 10.2.2.44221 |
Bundle Management | 10.2.2.46407 |
Content Distribution Point | 10.2.2.35837 |
Image Management | 10.2.2.22971 |
Inventory Management | 10.2.2.44624 |
Patch Management | 10.2.2.25717 |
Policy Management | 10.2.2.44165 |
Remote Management | 10.2.2.41884 |
User Management | 10.2.2.44834 |
Fixes:
TID 3255358 - First login for any domain user fails to login to ZCM agent passively
TID 3908106 - "Choose the network device" with Imaging on a PC with 2 NICs
TID 7002881 - zman does not save system variables when copying or exporting bundles
TID 7003490 - High memory consumption on managed agent devices with some migrated applications assigned
TID 7003576 - Advanced Remediation Options will not display more patches than will fit on one "page"
TID 7003850 - DLU: "There was an error while applying settings for the file" if file/directory does not exist
TID 7003919 - Deploying patch to device group lists all devices including patched devices
TID 7003959 - "Copy if exists" may create empty directory
TID 7003993 - Windows 98 System Requirement is migrated as NT requirement
TID 7004005 - System Requirements wrongly migrated for apps with system requirements created in NWADMIN
TID 7004101 - Workstation to workstation multicast fails if a directory has very large number of files
TID 7004152 - Cannot run CMD.EXE as Dynamic Administrator
TID 7004232 - Routers discovered as Unknown SNMP when using Windows Discovery Proxy
TID 7004301 - After upgrading to ZCM 10.2.1, Mount Points for content-repo may be lost
TID 7004308 - Devices do not register properly with ZCM 10.2.1
TID 7004310 - DNS ceases to function after the ZCM 10.2.1 Agent is installed
TID 7004316 - Error in ZCC loading Patch Management page with Oracle Database back-end
TID 7004377 - Periodic hang on ZCC while accessing some Patch Management pages
TID 7004458 - Imported bundle content remains in content-repo/tmp directory on Linux
TID 7004463 - ZCM Agent is removing Internet Explorer Proxy Settings
TID 7004465 - ZENworks Monitor service fails to load on Windows servers
TID 7004504 - Slow ZCM Login due to delay in starting ZCM services
TID 7004560 - Discovery Tasks fail against an AD User source
TID 7004638 - Slow login due to large amount of files in the ZEN cache
TID 7004641 - DLU User not added to groups when computer name is same as user name
TID 7004670 - "Migration could not continue as the migrating user was not found on the device."
TID 7004710 - Error when enforcing or unenforcing group policies
TID 7004846 - java Exception when clicking "deployment" in task menu
TID 7004928 - Product manufacturers within ZCC reports have invalid manufacturer names
TID 7005049 - Product Suite is not being reported in Inventory
TID 7003049 - ZCM 10.1.3 Download of content from the content repository takes too long
TID 7005050 - Wireless MAC address not in inventory
TID 7005057 - ZCC very slow for Non-SuperAdmins
TID 7005061 - Unable to use WOL option for Workstation Groups using ZCC
TID 7005044 - LockAcquisitionException errors causing slow ZCC, queue tasks stuck in new state etc.
TID 7004590 - Attempt to install additional primary servers returns the following message: Internal CA Service URL not found
TID 7005045 - Objects missing from usersource when ldap server does not support server side sort control request
TID 7005038 - High memory utilization when launching a large bundle containing macros
TID 7005051 - Printers not being found by Network Discovery
TID 7005040 - Imaging not loading the correct Realtek driver.
TID 7005048 - Recurring queue actions lost if queue reset manually
TID 7005042 - Unable to image Acer Netbook Aspire one D250
TID 7005043 - License Consumption is showing invalid results
TID 7005069 - Server fails to install into existing zone
TID 7004857 - Symantec Endpoint Protection Manager 11 installation or update fails with ZCM 10.2.x Agent installed
TID 7005119 - Inventory client KnowledgeBase (PRU) files are not updated in ZENworks 10 Asset Management-only environment
TID 7005123 - Patch subscription will not complete on SLES 11 64-bit primary server
TID 7005124 - SLE and RedHat devices show as "UNIX" in "Inventory Only Devices" panel
TID 7005132 - Multiple instances of "C:\Program Files\Novell\ZENworks\bin" in the path
TID 7005133 - Windows 2008 and NT servers with Inventory-only agent show incorrect Operating System (XP) in Inventory
TID 7005134 - No results returned when "Device - Is Retired" filter is used in Inventory
TID 7005135 - Copy Files action will not create shortcut if the shortcut name is amended
TID 7005142 - Cannot import files from portable collector
TID 7005143 - iPrint policy fails to migrate if zip file is not named nipp.zip or nipp-s.zip
TID 7005144 - Cannot login to DLU account created with specified credentials, in disconnected mode
TID 7005145 - GroupWise does not exit cleanly on a workstation that has the ZCM agent installed
TID 7005146 - "Install File(s)" and "Install Directory" actions do not work if the destination is a mapped drive
TID 7005147 - Inventory-only agent will not register device with the same hostname as an existing device
TID 7005148 - "Launch Windows Executable", "Compatibility Mode" does not have options for XP or newer OS
TID 7005176 - ZCM 10.2.1 configuring registry settings in bundle do not get saved correctly
TID 7005178 - Migrated bundles fail to be installed if a migrated filename contains “&”
TID 7005179 - ZCM 10.2 software reported from the agents is not showing up in ZCC
TID 7005284 - Inventory Only Agent install fails in HP-UX
TID 7005348 - Server becomes inaccessible and ZenworksWindowsService hangs
TID 7005349 - Unable to use WOL after 10.2.1 update
TID 7005054 - java.util.EmptyStackException error when user clicks on Devices / Servers and clicks on "Specify Content"
TID 7004845 - Viewing DLU policy detail tab returns: "Error: An error has occurred while displaying the policy data."
TID 7004770 - After successful image, ziswin does not re-configure machine
TID 7005053 - Content not replicated when symbolic link is used to point to new location of content-repository
TID 7005687 - Modifying ZCC Administrator Accounts Causes Java Exception
TID 7005802 - No Way To Export And Import Closest Server Rules
TID 7006301 - User deleted from the user source still shows as administrator in ZCC
TID 7004902 - ZENworks Imaging partition is not automatically updated
TID 7005175 - Imaging errors on Dell 960
TID 7008053 - exception: System.ComponentModel.Win32Exception: The handle is invalid
TID 7008060 - ZCM login window appears in English on a French workstation
TID 7008170 - October PRU does not deploy on Linux System Update server
TID 7008323 - Password with Currency Symbol (£) does not store in credential store
Fixes (TID Pending):
Bug 507505 Devices that miss their scheduled inventory scan do not process immediately if unable to execute on schedule
Bug 522974 ZCM agent gets unresponsive
Bug 524355 PROXY_SETTINGS.xml is not deleted/updated if the ZCM Proxy is removed in the ZCC
Bug 526509 ZCM Agent does not properly write TMP files to the %TEMP% directory is HOMESHARE points to a Network Drive
Bug 527211 ZPM bundles wont distribute in the content repot
Bug 534821 need steps to update a remote Sybase installation
Bug 537878 MICASAD.exe disappears on clients after CASA is updated to 10.2.1
Bug 539011 DLU Fails to apply on older workstations
Bug 541083 Migration Utility does not place Quotes around MSI files names that contain spaces
Bug 541121 ZMD7 "Progress UI Level" apps when migrated grant the "Cancel" option to users.
Bug 541866 New devices get registered to already existing device object
Bug 542894 "Terminal Server" System Requirements are lost during migration
Bug 543234 MSI Properties not migrated from ZDM7 using Migration Wizard
Bug 543596 MSPs should be migrated with the same parameters as the parent MSI
Bug 544691 DAU Accounts are not cleaned up, even after a reboot.
Bug 544737 ZCM Agent treats the GUID for "Bundle Requirements" as Case Sensitive
Bug 544857 "Prompt user before uninstalling application" setting is not migrated from ZDM7 to ZCM10
Bug 545078 Migration Utility Truncates MST File names if more than 3 characters are in the UNC Path including MST file name.
Bug 552120 Custom adm template fails to apply