ZALOG job under ZALOG subsystem won't start after saving and restoring our system to a new AS/400 (NETIQKB38856)

  • 7738856
  • 02-Feb-2007
  • 08-Oct-2007

Resolution

fact
VigilEnt Security Agent for iSeries 7.5

fact
VigilEnt Security Agent for PSAudit 7.5

fact
VigilEnt Security Agent for iSeries 5.4/7.0

fact
VigilEnt Security Agent for iSeries PSAudit 5.4

fact
System Access Analysis (SAA)

symptom
ZALOG job under ZALOG subsystem won't start after saving and restoring our system to a new AS/400

cause
This can occur when moving one AS/400 system to another.

fix

Use the following steps to uninstall SAA and reinstall it.  

  1. End subsystem ZALOG if it is running, with command ENDSBS .
  2. From the SAA menu, select Option 12 Uninstall System Access Analysis and press Enter.
  3. Select Option 1 and a box will pop up on the window telling you it is going to Set up SAA for batch, press Enter to allow this.
  4. Select Option 1 the screen will then come up, press F12 to get back to the SAA menu.
  5. If you wish to capture activities from Interactive jobs, select Option 11 Configure SAA for Interactive Jobs and press Enter.
  6. Choose Option 6=Apply SAA Capture (VCP), next to the SIGNOFF command and ENDPASTHR command in Library QSYS and  press Enter.
  7. Select Option 4 Start Batch Monitor (STRSBS ZALOG), press Enter. 
  8. Choose Option 10 Work With ZALOG Subsystem Jobs to confirm that the ZALOG job is there.


Additional Information

Formerly known as NETIQKB38856