Default values in Profile and Password Management to archive user profiles are set to "Y" but the pr (NETIQKB30837)

  • 7730837
  • 02-Feb-2007
  • 18-May-2007

Resolution

fact
VigilEnt Security Agent for AS/400 5.3/6.3

fact
VigilEnt Security Agent for iSeries 5.4/7.0

fact
Profile and Password Management (PPM)

symptom
Default values in Profile and Password Management to archive user profiles are set to "Y" but the profiles are not archived.

fix

From a command line, complete the following steps:

  1. Type WRKREGINF and press Enter.

  2. Locate Exit Point, QIBM_QSY_DLT_PROFILE DLTP0100, and use Option 5=Display exit point. Confirm it has Exit Program, ZPRP78, in library, PSSECURE, attached to it.

  3. Locate Exit Point, QIBM_QSY_DLT_PROFILE DLTP0200, and use Option 5 to confirm it has Exit Program, ZPCL92, in library, PSSECURE, attached to it.

  4. If either is missing, use F12 to return to the WRKREGINF screen.

  5. Use Option 8=Work with exit programs for either or both Exit Points, and then use Option 1=Add to the appropriate exit program as noted above.


Normally, this is done automatically by selecting 'Y' or 'N' for the Archive user profiles deleted outside of PSSECURE field on the UPM Defaults screen, accessed via the following path from a command line:

  1. PSMENU
  2. Option 2 PSSecure
  3. Option 2 PPM
  4. Option 1 General Options Menu
  5. Option 16 Change Defaults


Additional Information

Formerly known as NETIQKB30837