What is contained in the Reload DIAGNOSTICS log

  • 7019970
  • 08-Oct-2008
  • 29-Aug-2017

Environment

Reload (all versions)

Situation

What is the DIAGNOSTICS.LOG used for, and what does it contain?

Resolution

Server statistics like kernel version, disk space, processor, memory, nic, resolv.cfg, hosts, and fstab.  The following is a Diagnostics log file:

GWAVA Reload Diagnostics Tool Logfile

Log Creation Date and Time: Wed Oct  8 14:02:40 MDT 2008

~~~~~~~~~~~~~~~~~~~~~~~~~ /etc/issue ~~~~~~~~~~~~~~~~~~~~~~~~~

Welcome to SUSE Linux Enterprise Server 10 SP2 (i586) - Kernel \r (\l).

 

~~~~~~~~~~~~~~~~~~~~~~~~~ uname -a ~~~~~~~~~~~~~~~~~~~~~~~~~

Linux jh-gwaval 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 UTC 2008 i686 i686 i386 GNU/Linux

~~~~~~~~~~~~~~~~~~~~~~~~~ /proc/version ~~~~~~~~~~~~~~~~~~~~~~~~~ echo

Linux version 2.6.16.60-0.21-smp (geeko@buildhost) (gcc version 4.1.2 20070115 (SUSE Linux)) #1 SMP Tue May 6 12:41:02 UTC 2008

~~~~~~~~~~~~~~~~~~~~~~~~~ runlevel ~~~~~~~~~~~~~~~~~~~~~~~~~

N 5 ~~~~~~~~~~~~~~~~~~~~~~~~~ hostname --long ~~~~~~~~~~~~~~~~~~~~~~~~~

gwava1

~~~~~~~~~~~~~~~~~~~~~~~~~ w ~~~~~~~~~~~~~~~~~~~~~~~~~

 14:02:40 up 50 days, 23:10, 10 users,  load average: 1.26, 1.00, 0.75 USER     TTY        LOGIN@   IDLE   JCPU   PCPU WHAT root     :0        26Aug08 ?xdm?  35:28m  0.82s /opt/gnome/bin/gnome-session root     pts/1     22Sep08 16days  0.01s 15.33s gnome-terminal root     pts/0     08:07    5:30m  2.63s 15.33s gnome-terminal ~~~~~~~~~~~~~~~~~~~~~~~~~ uptime ~~~~~~~~~~~~~~~~~~~~~~~~~

  2:02pm  up 50 days 23:10,  8 users,  load average: 1.26, 1.00, 0.75

~~~~~~~~~~~~~~~~~~~~~~~~~ /proc/cpuinfo ~~~~~~~~~~~~~~~~~~~~~~~~~

processor : 0 vendor_id : GenuineIntel cpu family : 15 model  : 6 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 cpu MHz  : 2793.171 cache size : 2048 KB physical id : 0 siblings : 2 core id  : 0 cpu cores : 2 fdiv_bug : no hlt_bug  : no f00f_bug : no coma_bug : no fpu  : yes fpu_exception : yes cpuid level : 6 wp  : yes flags  : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx... bogomips : 5591.55

processor : 1 vendor_id : GenuineIntel cpu family : 15 model  : 6 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 cpu MHz  : 2793.171 cache size : 2048 KB physical id : 0 siblings : 2 core id  : 1 cpu cores : 2 fdiv_bug : no hlt_bug  : no f00f_bug : no coma_bug : no fpu  : yes fpu_exception : yes cpuid level : 6 wp  : yes flags  : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts...

~~~~~~~~~~~~~~~~~~~~~~~~~ free -m ~~~~~~~~~~~~~~~~~~~~~~~~~

             total       used       free     shared    buffers     cached Mem:          2025       1890        134          0         37       1509 -/+ buffers/cache:        344       1680 Swap:         2055        345       1710

~~~~~~~~~~~~~~~~~~~~~~~~~ ifconfig ~~~~~~~~~~~~~~~~~~~~~~~~~

eth0      Link encap:Ethernet  HWaddr 00:18:8B:7E:58:24            inet addr:10.10.10.11  Bcast:10.1.1.255  Mask:255.255.255.0           inet6 addr: fe80::218:8bff:fe7e:5824/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:24018895 errors:0 dropped:0 overruns:0 frame:0           TX packets:7521590 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:2976050774 (2838.1 Mb)  TX bytes:1445479187 (1378.5 Mb)           Interrupt:177

lo        Link encap:Local Loopback            inet addr:127.0.0.1  Mask:255.0.0.0           inet6 addr: ::1/128 Scope:Host           UP LOOPBACK RUNNING  MTU:16436  Metric:1           RX packets:11179389 errors:0 dropped:0 overruns:0 frame:0           TX packets:11179389 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:897035174 (855.4 Mb)  TX bytes:897035174 (855.4 Mb)

~~~~~~~~~~~~~~~~~~~~~~~~~ netstat -rn ~~~~~~~~~~~~~~~~~~~~~~~~~

Kernel IP routing table Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface 169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0 127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo 0.0.0.0         10.1.1.1        0.0.0.0         UG        0 0          0 eth0 ~~~~~~~~~~~~~~~~~~~~~~~~~ /etc/resolv.conf ~~~~~~~~~~~~~~~~~~~~~~~~~

nameserver 2 search gwava.com

~~~~~~~~~~~~~~~~~~~~~~~~~ /etc/hosts ~~~~~~~~~~~~~~~~~~~~~~~~~

# # hosts         This file describes a number of hostname-to-address #               mappings for the TCP/IP subsystem.  It is mostly #               used at boot time, when no name servers are running. #               On small systems, this file can be used instead of a #               "named" name server. # Syntax: #    # IP-Address  Full-Qualified-Hostname  Short-Hostname #

127.0.0.1       localhost

# special IPv6 addresses ::1             localhost ipv6-localhost ipv6-loopback

fe00::0         ipv6-localnet

ff00::0         ipv6-mcastprefix ff02::1         ipv6-allnodes ff02::2         ipv6-allrouters ff02::3         ipv6-allhosts ~~~~~~~~~~~~~~~~~~~~~~~~~ /etc/fstab ~~~~~~~~~~~~~~~~~~~~~~~~~

/dev/disk/by-id/scsi-SATA_ST3160812AS_5LS8NHK6-part2 /                    reiserfs   acl,user_xattr        1 1 /dev/disk/by-id/scsi-SATA_ST3160812AS_5LS8NHK6-part1 swap                 swap       defaults              0 0 proc                 /proc                proc       defaults              0 0 sysfs                /sys                 sysfs      noauto                0 0 debugfs              /sys/kernel/debug    debugfs    noauto                0 0 usbfs                /proc/bus/usb        usbfs      noauto                0 0 devpts               /dev/pts             devpts     mode=0620,gid=5       0 0

~~~~~~~~~~~~~~~~~~~~~~~~~ $PATH ~~~~~~~~~~~~~~~~~~~~~~~~~

/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:...

~~~~~~~~~~~~~~~~~~~~~~~~~ df -h / ~~~~~~~~~~~~~~~~~~~~~~~~~

Filesystem            Size  Used Avail Use% Mounted on /dev/sda2             147G  128G   20G  87% /

~~~~~~~~~~~~~~~~~~~ DBCOPY Info ~~~~~~~~~~~~~~~~~~~~~~~~~~

 GroupWise Database Copy Utility (DBCOPY)  Copies GroupWise files from source to destination. Source and destination  database files (.DB) will be placed in a locked state during the copy.  A log file will be created in the destination directory.  Press 's' to cancel a transaction lock or stop the copy for a file.  Options:  -i mm-dd-yyyy  Copy only source files that are newer than the specified date.  -m             Copy all directories and files as part of a migration.  -b             Copy attachment or document storage (BLOB) files.  -f             Indicate this is the first pass of the migration.  -s             Indicate this is the second pass of the migration.  -t             Specify the number of copy threads.  -u             TCPIP port number where dbcopy will accept status requests.                 (for Migration tool use ).  -v             Turn on verbose logging.  -w      Turn on logging to screen continuously.  -d             Indicate this is a migration for domain.  -p             Indicate this is a migration for post office.  -a             IP address that dbcopy will bind to.                 Bind to all if not specifed (for Migration tool use ).  -k             Skip collecting the size for the post office or domain.                 (for Migration tool use ).  -o             Skip carrying out the second copy of offiles.  -l      Perform the GWCheck function of storelowercase only.  Source         Specifies the path to the GroupWise Post Office or Domain to copy.  Destination    Specifies the path where the GroupWise files will be copied.  Example:       DBCOPY -m -s -p -i 5-25-2006 <Source> <Destination>  DBCOPY -       Version 3.2 Copyright 1994-2006 Novell,Inc.                 All rights reserved.                 May be used with GroupWise 5.x, 6.x and 7.0 database and                 attachment files.

~~~~~~~~~~~~~~~~~~~ Supporting Software Info ~~~~~~~~~~~~~~~~~~~~~~~~~~

Checking to see if Perl is installed

Perl is installed

Checking to see if Python is installed

Python is installed

Additional Information

This article was originally published in the GWAVA knowledgebase as article ID 466.