ASUS MCP61 M2N-MX SE Plus (x03ef) and ASUSTeK P5LD2-X/1333 (0x2048) not loading

  • 7001650
  • 14-Oct-2008
  • 30-Sep-2016

Environment

Novell ZENworks 7 Desktop Management Support Pack 1 - ZDM7 SP1
Novell ZENworks 7 Desktop Management on Linux Support Pack 1 - ZDML7 SP1

Situation

ASUS MCP61 M2N-MX SE Plus (x03ef) and ASUSTeK P5LD2-X/1333 (0x2048) not loading on any ZDM 7 SP1 IR1 or later.

Resolution

To obtain a hot patch with the fix for this problem, follow the instructions in KB 3484245 "Updates to Novell ZENworks 7 Desktop Management" which can be found at https://www.novell.com/support

Additional Information

### M2N-MX SE Plus ###
 
linux-5atb:/home/henry # hwinfo --netcard
19: PCI 07.0: 0200 Ethernet controller
  [Created at pci.301]
  UDI: /org/freedesktop/Hal/devices/pci_10de_3ef
  Unique ID: rBUF.vNtGbw3tPh6
  SysFS ID: /devices/pci0000:00/0000:00:07.0
  SysFS BusID: 0000:00:07.0
  Hardware Class: network
  Model: "ASUSTeK MCP61 Ethernet"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x03ef "MCP61 Ethernet"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x8234
  Revision: 0xa2
  Driver: "forcedeth"
  Driver Modules: "forcedeth"
  Device File: eth0
  Memory Range: 0xdfffd000-0xdfffdfff (rw,non-prefetchable)
  I/O Ports: 0xe480-0xe487 (rw)
  IRQ: 220 (42719 events)
  HW Address: 00:1d:60:c7:b5:b6
  Link detected: yes
  Module Alias: "pci:v000010DEd000003EFsv00001043sd00008234bc06sc80i00"
  Driver Info #0:
    Driver Status: forcedeth is active
    Driver Activation Cmd: "modprobe forcedeth"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
 
 
 
########################################
 
NetCard Info P5LD2-X/1333
 
root@ubuntu:/home/ubuntu# hwinfo --netcard
27: PCI 200.0: 0200 Ethernet controller                         
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1969_2048
  Unique ID: rBUF.GxIm+EUdtcE
  Parent ID: qTvu.4chw4Z9dkyF
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "ASUSTeK Ethernet controller"
  Vendor: pci 0x1969 
  Device: pci 0x2048 
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x8233 
  Revision: 0xa0
  Driver: "ATL2"
  Driver Modules: "atl2"
  Device File: eth0
  Memory Range: 0xddec0000-0xddefffff (rw,non-prefetchable)
  Memory Range: 0xddea0000-0xddebffff (ro,prefetchable,disabled)
  IRQ: 17 (36176 events)
  HW Address: 00:1d:60:28:47:ec
  Link detected: yes
  Module Alias: "pci:v00001969d00002048sv00001043sd00008233bc02sc00i00"
  Driver Info #0:
    Driver Status: atl2 is active
    Driver Activation Cmd: "modprobe atl2"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

Feedback service temporarily unavailable. For content questions or problems, please contact Support.