Environment
Novell NetWare 6.5 Support Pack 5
Novell iSCSI Initiator 1.05
Situation
Initiator doesn't always connect to all the LUNS presented to it by the Target.
Missing a couple LUNS after NetWare initiator connects to iSCSI Target device.
Resolution
Fixed in ISCSI version 1.06 build Nov 13, 2006 or newer.
Fix is included with NetWare 6.5 Support Pack 7 or higher.
Additional Information
The problem was in the report luns code. We only accept upto 64 luns in a
report lun packet and the LUNS being presented by the Target were not in sequential order.
report lun packet and the LUNS being presented by the Target were not in sequential order.
For example: LUNS 100, 101, 102 were often the LUNS which would not show up after the ISCSI connections were made. LUNS 0 - 64 would always show up.