Using iPrint with a secondary IP address

  • 10068285
  • NOVL71838
  • 13-Feb-2002
  • 20-Aug-2003

Archived Content: This information is no longer maintained and is provided 'as is' for your convenience.

Goal

Using iPrint with a secondary IP address

Fact

Novell NetWare 6.0

NetWare 5.1

NW51SP3.EXE

Symptom

Unable to access iManage on secondary IP address.

can't access iPrint web page on secondary IP address

NDPSM binding to wrong IP address 

Change

By default, NDPS and iPrint will use the first IP address bound to the server's LAN card as viewed in AUTOEXEC.NCF or INETCFG >View Configuration > Protocol Bind Commands.

Fix

To configure iPrint to use a secondary IP address, bind both the NDPSM manager and the http stack to the secondary IP address as follows:

1. Bind the NDPS manager to the secondary IP address with the command:

NDPSM /ipaddress = xxx.xxx.xxx.xxx  

For more details see tid 10065012: Can the NDPS Manager specify an IP address?


2. Bind httpstk to the secondary IP address with the command:

HTTPBIND XXX.XXX.XXX.XXX /keyfile:"<SSL Certificate Name>"

For more details see tid 10066825: Multiple IP Addresses for Management Portal (HTTPSTK)